Adapter Plate
This adapter plate was made using the plans found in this thread. I paid $16 for a piece of 3/8" plate steel 12" x 15". I had a friend drill and countersink the holes because he has access to a digital readout milling machine. The cutting, tapping, and welding I did myself. The plate is very similar to the Acme adapter plate, of course this one only set me back under $50, not $425+. It also took a lot more work, but I enjoy work.
Toyota Side
| VW Side
| Bolted to the TDI
| Bell Housing Bolted On
| Looks Centred to Me
| Two Piece Pilot Bearing
| Bearing Machined to Spec
| Bearing Pressed into Crank
| Small Drill Press Fail
| TDI Crank Bolt Pattern Transfer Plate
| Re-drilling Toyota Flywheel for TDI Crank
| Flywheel Bolted to Crank
| Starter Turbo Clearance
| TDI Mated to Toyota Transmission
| New Timing Mark Close
| New Timing Mark
|
|